Xilica XD Series Manuel d'utilisateur télécharger pdf

XCONSOLE COMMUNICATION PROTOCOL (April, 2008)

Serial Settings for the master terminal:

- 115200 baud

- 8 data bits

- 2 stop bits

- No Parity

- No Flow Control

Serial Settings for the Xilica device:

- 115200 baud

- Device# set as the same as the protocol Device# (Device 1 in the system menu of the device refers to Device

0 (<20>) in the protocol)

Format used is readable ASCII (96 values for each character) unless specified otherwise:

Value ASCII Denote

0 0x20 <20>

: : :

95 0x7F <7F>

Note: All Device#, Channel#, Aux# starts from 0 (<20> in the protocol) for Device 1, Channel 1, Aux 1 respectively.

This is called zero-based in computer programming.

1 2 3 4 5 6 7

Page 1

XCONSOLE COMMUNICATION PROTOCOL (April, 2008) Serial Settings for the master terminal: - 115200 baud - 8 data bits - 2 stop bits - No Parity

Page 2

PROTOCOL STRING <01><READ/WRITE><SENDER><HEADER><VALUE>...<PROCESS><CHECKSUM><02> 1 1

Page 3

<CHECKSUM> The Checksum is calculated from <01> to the character before the checksum, which should be <1F>. The formula used is:

Page 4

EXAMPLES Example #1 – Mute: <01><57><7F><03><4D><55><54><30><08><20><09><21>&l

COMMAND AND CORRESPONDING VALUE TABLES AUDIO COMMAND ID Data Min Data Max Value Min Value Max Value Step Meter MTR0 Mute MUT0 0 1 OFF ON Mi

Page 6

SPECIAL COMMAND ID COLUMN Data Level Increment #LVL 1 (<21>) #Steps of 0.25dB Level Decrement #LVL 0 (<20>) #Steps of 0.25dB SYS

Page 7

ADVANCED SPECIFIC PROCEDURE Program Download 1. PC sends Download ON command (%PD0 with data = <21>) 2. PC starts sending each parameter (ju

Modèles reliés XP Series | XConsole |

Pas de commentaire